OLED:organic light-emitting diode
emissive electroluminescent layer is a film of organic compound which emits light in response to an electric current
There are two main families of OLEDs
- based on small molecules
- based on polymers
TYPES OF SCREEN TECHNOLOGY USED
- LED :LIGHT EMITTING DIODE
- PMOLED : PASSIVE MATRIX ORGANIC LIGHT EMITING DIODE
- AMOLED : ACTIVE MATRIX ORGANIC LIGHT EMITING DIODE
METRIAL USED IN LEDs TECHNOLOGY
- POLYMER LIGHT EMITING DIODE
- PHOSPHORECENT LIGHT EMMITING DIODE
Working principle
A typical OLED is composed of a layer of organic materials situated between two electrodes, the anode and cathode, all deposited on a substrate. The organic molecules are electrically conductive as a result of delocalization of pi electrons caused by conjugation over all or part of the molecule. These materials have conductivity levels ranging from insulators to conductors, and therefore are considered organic semiconductors. The highest occupied and lowest unoccupied molecular orbitals (HOMO and LUMO) of organic semiconductors are analogous to the valence and conductionbands of inorganic semiconductors.
Originally, the most basic polymer OLEDs consisted of a single organic layer. One example was the first light-emitting device synthesised by J. H. Burroughes et al., which involved a single layer of poly(p-phenylene vinylene). However multilayer OLEDs can be fabricated with two or more layers in order to improve device efficiency. As well as conductive properties, different materials may be chosen to aid charge injection at electrodes by providing a more gradual electronic profile, or block a charge from reaching the opposite electrode and being wasted. Many modern OLEDs incorporate a simple bilayer structure, consisting of a conductive layer and an emissive layer. More recent developments in OLED architecture improves quantum efficiency (up to 19%) by using a graded heterojunction. In the graded heterojunction architecture, the composition of hole and electron-transport materials varies continuously within the emissive layer with a dopant emitter. The graded heterojunction architecture combines the benefits of both conventional architectures by improving charge injection while simultaneously balancing charge transport within the emissive region
Originally, the most basic polymer OLEDs consisted of a single organic layer. One example was the first light-emitting device synthesised by J. H. Burroughes et al., which involved a single layer of poly(p-phenylene vinylene). However multilayer OLEDs can be fabricated with two or more layers in order to improve device efficiency. As well as conductive properties, different materials may be chosen to aid charge injection at electrodes by providing a more gradual electronic profile, or block a charge from reaching the opposite electrode and being wasted. Many modern OLEDs incorporate a simple bilayer structure, consisting of a conductive layer and an emissive layer. More recent developments in OLED architecture improves quantum efficiency (up to 19%) by using a graded heterojunction. In the graded heterojunction architecture, the composition of hole and electron-transport materials varies continuously within the emissive layer with a dopant emitter. The graded heterojunction architecture combines the benefits of both conventional architectures by improving charge injection while simultaneously balancing charge transport within the emissive region
ADVANTAGES
- LOW RUNNING COST IN FUTURE
- LIGHT WEIGHT
- FLEXIBLE GLASSY SUBSTANCE
- IMPROVED BRIGHTNESS
- WIDER ANGLE VIEW
- BETTER POWER EFFICIENCY
- QUICK RESPONSE TIME
POSTED BY: PARAS ARORA
SOURCE : WIKIPEDIA ,www.oled-info.com/flexible-oled
No comments:
Post a Comment
Thanks for visiting...